4×8″ Titanium Exhaust Heat Shield with 2 Clamps,Exhaust Wrap Motorcycle Heat Shield for Heats Insulation,2-layer Exhausts Heats Wrap Can Withstand 1832°F Transient Temperature

EXHAUST HEAT SHIELD, NO MORE WORRIES ABOUT DIRECT CONTACT WITH HOT PIPES


Product Attributes
Colors: Silver, Brown
Sizes:
Total Size: 8.03*4.08*0.1 inch
Clamp Adjustable Diameter Range: 65-89 mm
Weight: 2.96 oz
Material: Basalt, Stainless Steel
Packaging: Heat Shield*1, Stainless Steel Clip*2
Long-term Temperature Resistance: 1382 °F / 750 °C
Instantaneous Temperature Resistance: 1832 °F / 1000 °C


Product Functions & Features
1. Pre-purchase Note: It is strongly recommended that the installation is carried out after wearing gloves to avoid skin irritation caused by direct contact with the surface material of the exhaust heat shield
2. Efficient Thermal Insulation: As an extra protective layer on the outside of the high temperature pipe, it refuses the high temperature to contact your skin directly and plays the role of thermal insulation, while reducing the noise of the pipeline to a certain extent, realizing the dual effect of thermal insulation & noise reduction
3. Multi-position Use: Besides the regular car/motorcycle pipe position, it is also a good choice to use it in the muffler/engine and other high temperature position


Product Installation
1. Open the clamp, pass through the center layer on both sides of the heat shield and wrap the heat shield around the pipe
2. Use the tool to adjust the clamp until it is securely fastened
Product Specification: Heat shield*1, stainless steel clips*2 for you, the total size of heat shield is 8.03*4.08*0.1 inch, the adjustable range of clips is 65-89 mm, 1382 °F long time withstand temperature, 1832 °F instantaneous withstand temperature
Insulation & Noise Reduction: No more worrying about exposed hot pipe causing you harm, use our exhaust pipe wrap as an extra layer of protection to insulate against high temperatures while also reducing pipeline noise to a certain extent
High Temperature Resistance: Using basalt as the main material of heat shield automotive, its high temperature resistance can maintain structural stability in high temperature environment, suitable for engine compartment temperature change drastic area
Multi-location Application: Our heat wrap for exhaust pipes are designed to cope with high temperatures and are compatible not only with the pipe area of cars and motorcycles, but also with high temperature components such as mufflers
Installation Steps: 1. Pass the clamp through the middle layer of exhaust wrap and wrap it around the pipe. 2. Use the tool to adjust the clamp until it is securely fastened. Use gloves before fitting to avoid skin irritation from the material